bugfix, esthetic cleanup, better comments, version bump

LICENSE

@@ -1,11 +1,29 @@
-Copyright (c) <year> <owner>. 
+Copyright 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
 
-Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+This is distributed with BSD-3-Clause license with the following terms and
+condition:
 
-1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
 
-2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+1. Redistributions of source code must retain the above copyright notice, this
+list of conditions and the following disclaimer.
 
-3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation and/or
+other materials provided with the distribution.
 
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+3. Neither the name of the copyright holder nor the names of its contributors
+may be used to endorse or promote products derived from this software without
+specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

README.md

@@ -1,3 +1,110 @@
 # profile
+This project aims to create an advanced bash profile. It includes some aliases,
+a customized prompt and several functions for different purposes. It's mostly
+targeted to system administrator but might satisfy some regular users.
 
-bash profile repository
+## 1. Getting started
+Download and extract (or use git clone) the profile archive into your home
+directory. You will have to modify your ~/.bashrc and/or ~/.profile file to add
+at the end (preferably):
+```
+source <installpath>/profile/profile.sh
+```
+
+It's not recommended to load that profile in /etc/profile as the users' .bashrc
+files might interfere with some aliases and functions defined in profile.
+
+## 2. What's the purpose?
+profile is giving access to numerous functions, aliases and to an advanced
+prompt. Here is a non-exhaustive list of what we have:
+- A bar style prompt with hour, execution time and exit code of the last
+command;
+- clean: erase after confirmation any backup file, possibly recursively;
+- dpkgs: search for the given pattern in the installed packages name;
+- expandlist: usefull in scripts, it expand any expression using wildcards into
+the corresponding list of file and directories;
+- genpwd: generate one or more random secure password;
+- gpid: give the list of PID matching the given process name;
+- help: display the list of available function and basic use;
+- isipv4: tell if the given parameter is a valid IPv4 address;
+- isipv6: tell if the given parameter is a valid IPv6 address;
+- ku: kill all the processes owned by the given user name or ID;
+- mcd: create a directory and immediately move into it;
+- meteo: display weather forecast information;
+- ppg: look for the given patern in the running processes;
+- rain: console screensaver with rain effect;
+- rmhost: remove the given host (name or IP) to the list of SSH known host;
+- rmspc: in the current directory it replace all the spaces in filenames with a
+underscore caracter (or any other given in option);
+- setc: set locale on standard C;
+- setfr: set locale on French;
+- settrace: allow the debugging of any script by showing a backtrace in case of
+error;
+- setus: set locale on US English;
+- showinfo: display basic informations about the host;
+- ssr: root ssh login to the given host;
+- taz: a universal command to compress files and directories, possibly several
+at once;
+- utaz: a utility that smartly uncompress many archives at once, creating a
+directory only if needed;
+- ver: show profile version.
+
+## 3. Configuration
+Some functions might have configurable default behaviour. You can create a
+.profile.conf file to configure those default behaviour. You should have a look
+at the doc/.profile.conf.example to see the list of available options.
+
+## 4. Contact and more information
+### 4.1. New users
+This project is very new in terms of publication, and I have no idea of who will
+use it, if any does. If you use (or plan to use) ```profile```, I'll be very
+happy if you simply mail me to let me know, especially if you don't plan to
+contribute. If you plan to contribute, I'll be twice happier for sure!
+
+### 4.2. Bugs
+**profile** bug tracker is hosted on its Gitea instance. Check the
+https://git.geoffray-levasseur.org/fatalerrors/profile page. If you find a bug,
+you can also submit a bug report to the maintainer mail address mentioned at
+the end of that document. A bug report may contain the command line parameters
+where the bug happens, OS details, the module that trigger it, if any, and the
+log file containing the error. Cygwin users: please note that bash
+implementation in Cygwin triggers regularly bugs on advanced code that triggers
+nothing with Linux or BSD. Please do not send synthax error bug repports if you
+didn't test the same code in the same conditions using a real Unix.
+
+Please check the to-do list before sending any feature request, as it might
+have already be requested.
+
+### 4.3. How to contribute?
+You are free to improve and contribute as you wish. If you have no idea what to
+do or want some direction, you can check the [to-do list](./doc/todo.md),
+containing desired future improvements. Make sure you always have the latest
+development version before starting your work.
+
+It's heavily recommended to use git to obtain the latest copy of profile tree.
+Make sure your git configuration is correct in order to contribute. Please
+contact me to obtain push authorizations, or, if you want to submit a patch, you
+can send it by mail to the maintainer of init.sh.
+
+Code written in Python or Perl might be accepted as long as it's not mobilizing
+a lot of dependencies (forget big framework). Anything that need the
+installation of packages not provided in minimal Debian or CentOS installation
+will be probably rejected.
+
+If you want to make a financial contribution, please contact me by mail.
+
+### 4.4. License, website, and maintainer
+Everything except configuration files is licensed under BSD-3 license. Please
+check license file allong this one.
+
+Please check [https://www.geoffray-levasseur.org/profile](https://www.geoffray-levasseur.org/profile).
+Note that this website is still under construction and needs some more care.
+
+You can mail author to fatalerrors \<at\> geoffray-levasseur \<dot\> org.
+
+-----------------------------------------------------------------------------
+
+Documentation (c) 2021-2022 Geoffray Levasseur.
+
+This file is distributed under3-clause BSD license. The complete license
+agreement can be obtained at: https://opensource.org/licenses/BSD-3-Clause

history.txt

@@ -0,0 +1,136 @@
+------------------------------------------------------------------------------
+Initial version from Beyond Linux From Scratch by
+    * James Robertson <jameswrobertson@earthlink.net>
+    * Dagmar d'Surreal <rivyqntzne@pbzpnfg.arg>
+------------------------------------------------------------------------------
+Current version from Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+------------------------------------------------------------------------------
+Version history:
+------------------------------------------------------------------------------
+
+# 24/02/2022 v3.3.1
+	Fixed version detection
+	Added "busy" function
+	Fixed use of library functions before it's loaded
+
+# 28/11/2022 v3.3.0
+	Initial version update support
+	Changed versioning code
+	Added installation path detection
+
+# 28/11/2022 v3.2.3
+	Made proper readme file, to improve
+
+# 21/11/2022 v3.2.2
+	Fixed taz compression level analysis
+	Fixed typo in dpkgs
+
+# 20/11/2022 v3.2.1
+	Fix some messages
+	Make dpkgs rpm aware (more to come)
+	Removed version history from main script and revert declaration order
+	Added required license information in all files
+	Completed LICENSE file
+
+# 18/11/2022 v3.2.0
+	Created disp command for display and make use of it
+
+# 10/11/2022 v3.1.1
+	genpwd: test if password is doable
+
+# 08/11/2022 v3.1.0
+	Added password generator
+
+# 07/11/2022 v3.0.1
+	Added concatenation to rmspc
+	Added ku
+	Error managed in meteo
+
+# 27/08/2022 v3.0.0
+	Splitted everything in several files
+	Added rain screensaver
+
+# 29/07/2022 v2.8.2
+	Added warning for non bash or zsh users
+
+# 19/07/2022 v2.8.1
+	Few cleanups, fixes and optimizations
+
+# 24/06/2022 v2.8.0
+	Added backtrace, error and settrace
+	[bugfix] corrected showinfo
+
+# 22/06/2022 v2.7.1
+	[bugfix] few minor corrections
+	Added help command
+
+# 21/06/2022 v2.7.0
+	Added isipv4 and isipv6 and use it in rmhost as an improvement
+	Removed konsole save and restore not working
+
+# 18/10/2021 v2.6.3
+	Changed PS1 for status bar style version
+	Few minor improvements
+
+# 26/02/2021 v2.6.2
+	[bugfix] taz: corrected bug with trailing slash on directories
+
+# 25/12/2020 v2.6.1
+	Add check on rmhost
+	Improvements rmspc
+	Created expendlist
+
+# 24/10/2020 v2.6.0
+	Added session save and restore for Konsole
+
+# 11/09/2020 v2.5.3
+	Few more aliases, improved code consistancy and typo,
+	Improved utaz, removed showdiskmap, removed remaining French,
+	Added license information for future publication
+
+# 06/03/2020 v2.5.2
+	Few aliases sorted out
+
+# 05/03/2020 v2.5.1
+	Language consistancy fix
+	Added pigz support in taz
+
+# 03/03/2020 v2.5.0
+	Added command taz and rmspc
+	Renamed auzip => utaz and improved it
+
+# 02/03/2020 v2.4.0
+	Added command auzip
+
+# 31/01/2020 v2.3.2
+	Figlet: changed default font to ansi_shadow
+
+# 16/01/2020 v2.3.1
+	[bugfix] non-interactive were blocked with some functions
+
+# 08/01/2020 v2.3.0
+	Added use of figlet and neofetch as a motd replace
+
+# 16/12/2019 v2.2.0
+	Added showinfo
+	Primary write of showdiskmap
+
+# 24/09/2019 v2.1.2
+	[bugfix] bug in profile version display
+
+# 23/09/2019 v2.1.1
+	[bugfix] dpkgs
+
+# 16/09/2018 v2.1.0
+	Added rmhost, setc, setfr
+	More locales management
+
+# 04/02/2017 v2.0.1
+	clean improvements (--shell)
+
+# 24/10/2015 v2.0.0
+	Added advanced functionnalities (clean, srr, etc.)
+
+# 16/02/2013 v1.0.0
+	Initial version
+

profile.d/compress.sh

@@ -1,47 +1,83 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Smartly uncompress archives (zip only)
 # ------------------------------------------------------------------------------
 utaz()
 {
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-h"|"--help")
-                echo "utaz: uncompress all the given files and/or the ones found in the given"
-                echo "      directories creating an host directory where needed."
-                echo
-                echo "Usage: utaz [option] [directorie(s)|file(s)]"
-                echo
-                echo "Options:"
-                echo "	-h, --help		Display that help screen"
-                echo "	-d, --delete		If decompression succeeded, delete the source file"
-                echo "	-c, --create-dir	Always create a host directory"
-                echo "	-n, --no-dir		Never create a host directory"
-                echo
-                return 0
-                ;;
+        "-h" | "--help")
+            echo "utaz: uncompress all the given files and/or the ones found in the given"
+            echo "      directories creating an host directory where needed."
+            echo
+            echo "Usage: utaz [option] [directorie(s)|file(s)]"
+            echo
+            echo "Options:"
+            echo "	-h, --help		Display that help screen"
+            echo "	-d, --delete		If decompression succeeded, delete the source file"
+            echo "	-c, --create-dir	Always create a host directory"
+            echo "	-n, --no-dir		Never create a host directory"
+            echo
+            return 0
+            ;;
 
-            "-d"|"--delete")
-                local willrm=1
-                ;;
+        "-d" | "--delete")
+            local willrm=1
+            ;;
 
-            "-c"|"--create-dir")
-                local createdir=1
-                ;;
+        "-c" | "--create-dir")
+            local createdir=1
+            ;;
 
-            "-n"|"--no-dir")
-                local nodir=1
-                ;;
+        "-n" | "--no-dir")
+            local nodir=1
+            ;;
 
-            "-"*)
-                disp E "Invalid option, use \"utaz --help\" to display options list"
-                echo
-                return 1
-                ;;
+        "-"*)
+            disp E "Invalid option, use \"utaz --help\" to display options list"
+            echo
+            return 1
+            ;;
 
-            *)
-                # The ${opt%/} writing is to remove trailing / if any
-                local LIST="$LIST ${opt%/}"
-                ;;
+        *)
+            # The ${opt%/} writing is to remove trailing / if any
+            local LIST="$LIST ${opt%/}"
+            ;;
         esac
     done
 
@@ -50,7 +86,7 @@ utaz()
     [[ ! $LIST ]] && local LIST="."
 
     for zitem in $LIST; do
-        [[ $(ls $zitem/*.zip 2> /dev/null | wc -l) -eq 0 ]] &&
+        [[ $(ls $zitem/*.zip 2>/dev/null | wc -l) -eq 0 ]] &&
             disp W "$zitem contains no supported archive file, skipping." &&
             continue
 
@@ -63,20 +99,20 @@ utaz()
                 disp E "The filesystem can't create directories, exit!" &&
                 return 1
 
-            unzip -o $f -d $dir > /dev/null 2>&1
+            unzip -o $f -d $dir >/dev/null 2>&1
             case $? in
-                0)
-                    [[ $willrm ]] && rm -f $f && disp I "File $zitem/$f deleted."
-                    ;;
+            0)
+                [[ $willrm ]] && rm -f $f && disp I "File $zitem/$f deleted."
+                ;;
 
-                1)
-                    disp W "Compression program returned a warning: deletion canceled."
-                    ;;
-                *)
-                    disp E "The zip file seems corrupted, failed."
-                    rm -rf $dir > /dev/null 2>&1
-                    continue
-                    ;;
+            1)
+                disp W "Compression program returned a warning: deletion canceled."
+                ;;
+            *)
+                disp E "The zip file seems corrupted, failed."
+                rm -rf $dir >/dev/null 2>&1
+                continue
+                ;;
             esac
 
             if [[ $createdir ]]; then
@@ -101,7 +137,7 @@ export -f utaz
 # ------------------------------------------------------------------------------
 # Compress directories or files into one or more archive
 # ------------------------------------------------------------------------------
-taz ()
+taz()
 {
     _doxz()
     {
@@ -135,7 +171,7 @@ taz ()
             local procopt=""
             [[ $2 -gt 1 ]] &&
                 disp W "lzip doesn't support multithreading, falling back to 1 thread." &&
-                disp W "Consitder installing plzip to obtain multithreading abilities."
+                disp W "Consider installing plzip to obtain multithreading abilities."
         }
 
         [[ $4 ]] && local verb="-vv"
@@ -208,68 +244,68 @@ taz ()
         return $?
     }
 
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-h"|"--help")
-                echo "taz: archive all files of a directory."
-                echo
-                echo "Usage: taz [option] [--parallel=<n>] [--format=<format>] [directory1 ... directoryN]"
-                echo
-                echo "Options:"
-                echo "	-h, --help	Display that help screen"
-                echo "	-d, --delete	Delete source file or directory after success"
-                echo "	-f, --format	Chose archive format in the given list. If several format are"
-                echo "			given, the smalest is kept"
-                echo "	-p, --parallel	Number of threads to use (if allowed by underlying utility)"
-                echo "	-v, --verbose	Display progress where possible"
-                echo "	-q, --quiet	Display less messages (only errors and warnings)"
-                echo "	-1, .., -9	Compression level to use [1=fast/big, 9=slow/small]"
-                echo
-                echo "Supported archive format:"
-                echo "	Param.| programs      | Algo. | Description"
-                echo "	------+---------------+-------+----------------------------------------"
-                echo "	   lz | plzip, lzip   | lzma  | Safe efficient default format"
-                echo "	   xz | xz            | lzma2 | Unsafe, not for long term"
-                echo "	  bz2 | pbzip2, bzip2 | bzip2 | Historical but less efficient than lz"
-                echo "	   gz | pigz, gzip    | lz77  | Historical, safe, fast"
-                echo "	  lzo | lzop          | lzo   | Very fast but no multithread"
-                echo "	  tar | tar           | tar   | No compression"
-                echo
-                return 0
-                ;;
+        "-h" | "--help")
+            echo "taz: archive all files of a directory."
+            echo
+            echo "Usage: taz [option] [--parallel=<n>] [--format=<format>] [directory1 ... directoryN]"
+            echo
+            echo "Options:"
+            echo "	-h, --help	Display that help screen"
+            echo "	-d, --delete	Delete source file or directory after success"
+            echo "	-f, --format	Chose archive format in the given list. If several format are"
+            echo "			given, the smalest is kept"
+            echo "	-p, --parallel	Number of threads to use (if allowed by underlying utility)"
+            echo "	-v, --verbose	Display progress where possible"
+            echo "	-q, --quiet	Display less messages (only errors and warnings)"
+            echo "	-1, .., -9	Compression level to use [1=fast/biggest, 9=slow/smallest]"
+            echo
+            echo "Supported archive format:"
+            echo "	Param.| programs      | Algo. | Description"
+            echo "	------+---------------+-------+----------------------------------------"
+            echo "	   lz | plzip, lzip   | lzma  | Safe efficient default format"
+            echo "	   xz | xz            | lzma2 | Unsafe, not for long term"
+            echo "	  bz2 | pbzip2, bzip2 | bzip2 | Historical but less efficient than lz"
+            echo "	   gz | pigz, gzip    | lz77  | Historical, safe, fast"
+            echo "	  lzo | lzop          | lzo   | Very fast but no multithread"
+            echo "	  tar | tar           | tar   | No compression"
+            echo
+            return 0
+            ;;
 
-            "-d"|"--delete")
-                local willrm=1
-                ;;
+        "-d" | "--delete")
+            local willrm=1
+            ;;
 
-            "-f"?*|"--format"?*)
-                local compform=$(echo "$opt" | cut -f 2- -d '=')
-                ;;
+        "-f"?* | "--format"?*)
+            local compform=$(echo "$opt" | cut -f 2- -d '=')
+            ;;
 
-            "-p"?*|"--parallel"?*)
-                local nproc=$(echo "$opt" | cut -f 2- -d '=')
-                ;;
+        "-p"?* | "--parallel"?*)
+            local nproc=$(echo "$opt" | cut -f 2- -d '=')
+            ;;
 
-            "-v"|"--verbose")
-                local verbose=1
-                ;;
+        "-v" | "--verbose")
+            local verbose=1
+            ;;
 
-	    "-q"|"--quiet")
-		QUIET=1
+        "-q" | "--quiet")
+            QUIET=1
+            ;;
 
-            "-"[1..9])
-                local complevel=$(echo $opt | sed 's/-//')
-                ;;
-
-            "-"*)
-                echo "Invalid option, use taz --help to display options list"
+        "-"*)
+            local complevel=$(echo $opt | sed 's/-//')
+            if ! [[ $complevel =~ ^[1-9]+$ ]]; then
+                disp E "Invalid option, use taz --help to display options list"
                 echo
                 return 1
-                ;;
+            fi
+            ;;
 
-            *)
-                local LIST="$LIST ${opt%/}"
-                ;;
+        *)
+            local LIST="$LIST ${opt%/}"
+            ;;
         esac
     done
 
@@ -277,7 +313,7 @@ taz ()
     [[ ! $nproc ]] && nproc=1
     [[ ! $complevel ]] && complevel=6
     [[ $verbose -gt 1 && $QUIET -gt 1 ]] &&
-	disp E "The --verbose and --quiet options can't be used together."
+        disp E "The --verbose and --quiet options can't be used together."
 
     for item in $LIST; do
         local donetar=0
@@ -303,14 +339,14 @@ taz ()
             disp I "\t Compressing archive..."
             _do$compform $fname $nproc $complevel $verbose
             [[ ! $? -eq 0 ]] && case $? in
-                127)
-                    disp E "Compression program unavailable, aborting."
-                    return 127
-                    ;;
-                *)
-                    disp E "Compression program returned an error, not deleting anything if asked, skipping to next item."
-                    continue
-                    ;;
+            127)
+                disp E "Compression program unavailable, aborting."
+                return 127
+                ;;
+            *)
+                disp E "Compression program returned an error, not deleting anything if asked, skipping to next item."
+                continue
+                ;;
             esac
 
             [[ $donetar -gt 0 ]] && rm $fname
@@ -324,3 +360,6 @@ taz ()
     unset QUIET
 }
 export -f taz
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/debug.sh

@@ -1,7 +1,43 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Display a backtrace
 # ------------------------------------------------------------------------------
-function backtrace ()
+function backtrace()
 {
     echo "========= Call stack ========="
     typeset -i i=0
@@ -10,7 +46,7 @@ function backtrace ()
     for func in "${FUNCNAME[@]}"; do
         if [[ $i -ne 0 ]]; then
             printf '%15s() %s:%d\n' \
-                   "$func" "${BASH_SOURCE[$i]}" "${BASH_LINENO[ (( $i - 1)) ]}"
+                "$func" "${BASH_SOURCE[$i]}" "${BASH_LINENO[(($i - 1))]}"
         fi
         let i++ || true
     done
@@ -21,52 +57,54 @@ function backtrace ()
 # ------------------------------------------------------------------------------
 # Function to be trapped for errors investigation
 # ------------------------------------------------------------------------------
-function error ()
+function error()
 {
     local errcode=$?
     backtrace
     return $errcode
 }
 
-
 # ------------------------------------------------------------------------------
 # Activate or deactivate error trapping to display backtrace
 # ------------------------------------------------------------------------------
-settrace ()
+settrace()
 {
     local status="off"
     [[ $(trap -p ERR) ]] && status="on"
     #trap -p ERR
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-h"|"--help")
-		echo "Try to activate backtrace display for script debugging."
-		echo
-		echo "Options:"
-		echo "	--on	Activate backtrace generation"
-		echo "	--off	Deactivate backtrace generation"
-		echo
-		echo "That function active a trap event on error. If the script you want to"
-		echo "debug overload the ERR bash trap, it will not work."
-		echo
-		;;
-	    "--on")
-		if [[ $status == "on" ]]; then
-		    disp W "ERR signal trap is already set, replacing previous trap!"
-		fi
-		trap "error" ERR
-		;;
-	    "--off")
-		if [[ $status != "on" ]]; then
-		    disp W "ERR signal trap is already unset!"
-		fi
-		trap - ERR
-		;;
-	    "--status")
-		disp "ERR trap signal is ${status}."
-		;;
-	esac
+        "-h" | "--help")
+            echo "Try to activate backtrace display for script debugging."
+            echo
+            echo "Options:"
+            echo "	--on	Activate backtrace generation"
+            echo "	--off	Deactivate backtrace generation"
+            echo
+            echo "That function active a trap event on error. If the script you want to"
+            echo "debug overload the ERR bash trap, it will not work."
+            echo
+            ;;
+        "--on")
+            if [[ $status == "on" ]]; then
+                disp W "ERR signal trap is already set, replacing previous trap!"
+            fi
+            trap "error" ERR
+            ;;
+        "--off")
+            if [[ $status != "on" ]]; then
+                disp W "ERR signal trap is already unset!"
+            fi
+            trap - ERR
+            ;;
+        "--status")
+            disp "ERR trap signal is ${status}."
+            ;;
+        esac
     done
     unset status
 }
 export -f settrace
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/disp.sh

@@ -1,3 +1,40 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
+# ------------------------------------------------------------------------------
 # Color definitions
 # ------------------------------------------------------------------------------
 # Standard 16 colors display declaration
@@ -75,38 +112,40 @@ export On_IPurple='\e[0;105m'
 export On_ICyan='\e[0;106m'
 export On_IWhite='\e[0;107m'
 
-
 # ------------------------------------------------------------------------------
 # Display a message
 # ------------------------------------------------------------------------------
 disp()
 {
     case $1 in
-        "I")
-            local heads="[ ${IGreen}info${DEFAULTFG} ]"
-            shift
-            [[ -z $QUIET || $QUIET -ne 1 ]] && echo -e "${heads} $@"
-            ;;
-        "W")
-            local heads="[ ${IYellow}Warning${DEFAULTFG} ]"
-            shift
-            echo -e "${heads} $@" >&2
-            ;;
-        "E")
-            local heads="[ ${IRed}ERROR${DEFAULTFG} ]"
-            shift
-            echo -e "${heads} $@" >&2
-            ;;
-	"D")
-	    local heads"[ ${ICyan}debug${DEFAULTFG} ]"
-	    shift
-	    [[ -n $DEBUG && $DEBUG -gt 1 ]] && echo -e "${heads} $@"
-	    ;;
-        "*")
-            local heads=""
-            [[ -z $QUIET || $QUIET -ne 1 ]] && echo -e "$@"
-            ;;
+    "I")
+        local heads="[ ${IGreen}info${DEFAULTFG} ]"
+        shift
+        [[ -z $QUIET || $QUIET -ne 1 ]] && echo -e "${heads} $@"
+        ;;
+    "W")
+        local heads="[ ${IYellow}Warning${DEFAULTFG} ]"
+        shift
+        echo -e "${heads} $@" >&2
+        ;;
+    "E")
+        local heads="[ ${IRed}ERROR${DEFAULTFG} ]"
+        shift
+        echo -e "${heads} $@" >&2
+        ;;
+    "D")
+        local heads"[ ${ICyan}debug${DEFAULTFG} ]"
+        shift
+        [[ -n $DEBUG && $DEBUG -gt 1 ]] && echo -e "${heads} $@"
+        ;;
+    "*")
+        local heads=""
+        [[ -z $QUIET || $QUIET -ne 1 ]] && echo -e "$@"
+        ;;
     esac
     unset heads
 }
 export -f disp
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/filefct.sh

@@ -1,3 +1,39 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # expandlist : treat wildcards in a file/directory list
 # ------------------------------------------------------------------------------
@@ -12,49 +48,48 @@ expandlist()
     echo $result
 }
 
-
 # ------------------------------------------------------------------------------
 # Clean a directory or a tree from temporary or backup files
 # ------------------------------------------------------------------------------
-clean ()
+clean()
 {
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-r"|"--recurs")
-                local recursive=1
-                ;;
+        "-r" | "--recurs")
+            local recursive=1
+            ;;
 
-            "-h"|"--help")
-                echo "clean: erase backup files in the given directories."
-                echo
-                echo "Usage: clean [option] [directory1] [...[directoryX]]"
-                echo
-                echo "Options:"
-                echo "	-h, --help	Display that help screen"
-                echo "	-r, --recurs	Do a recursive cleaning"
-                echo "	-f, --force	Do not ask for confirmation (use with care)"
-                echo "	-s, --shell	Do nothing and display what will be executed"
-                echo
-                return 0
-                ;;
+        "-h" | "--help")
+            echo "clean: erase backup files in the given directories."
+            echo
+            echo "Usage: clean [option] [directory1] [...[directoryX]]"
+            echo
+            echo "Options:"
+            echo "	-h, --help	Display that help screen"
+            echo "	-r, --recurs	Do a recursive cleaning"
+            echo "	-f, --force	Do not ask for confirmation (use with care)"
+            echo "	-s, --shell	Do nothing and display what will be executed"
+            echo
+            return 0
+            ;;
 
-            "-s"|"--shell")
-                local outshell=1
-                ;;
+        "-s" | "--shell")
+            local outshell=1
+            ;;
 
-            "-f"|"--force")
-                local force=1
-                ;;
+        "-f" | "--force")
+            local force=1
+            ;;
 
-            "-"*)
-                disp E "Invalid option, use \"clean --help\" to display usage."
-                echo
-                return 1
-                ;;
+        "-"*)
+            disp E "Invalid option, use \"clean --help\" to display usage."
+            echo
+            return 1
+            ;;
 
-            *)
-                local dirlist="$dirlist $opt"
-                ;;
+        *)
+            local dirlist="$dirlist $opt"
+            ;;
         esac
     done
 
@@ -65,7 +100,7 @@ clean ()
     unset recursive force
 
     for dir in $dirlist; do
-        local dellist=$(find $dir $findopt -type f -name "*~" -o -name "#*#" \
+        local dellist=$(find "$dir" $findopt -type f -name "*~" -o -name "#*#" \
             -o -name "*.bak" -o -name ".~*#")
         for f in $dellist; do
             if [[ ! $outshell ]]; then
@@ -79,73 +114,71 @@ clean ()
 }
 export -f clean
 
-
 # ------------------------------------------------------------------------------
 # Create a directory then goes inside
 # ------------------------------------------------------------------------------
-mcd ()
+mcd()
 {
-    if [[ ! $# -eq 1 ]] ; then
+    if [[ ! $# -eq 1 ]]; then
         disp E "Create a directory then goes inside."
         disp E "Usage: mcd <directory>"
         return 1
     fi
-    mkdir -pv $1 && cd $1
+    mkdir -pv "$1" && cd "$1" || echo "Failed create or change directory."
 }
 export -f mcd
 
-
 # ------------------------------------------------------------------------------
 # Rename all files in current directory to replace spaces with _
 # ------------------------------------------------------------------------------
-rmspc ()
+rmspc()
 {
     local lst=""
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-h"|"--help")
-                echo "rmspc: remove spaces from all filenames in current directories"
-                echo
-                echo "Usage: rmspc [option]"
-                echo
-                echo "Options:"
-                echo "	-h, --help		Display that help screen"
-                echo "	-r, --recursive		Treat subdirectories of the given directory"
-                echo "	-c, --subst-char	Change the replacement character (default is underscore)"
-                echo "	-v, --verbose		Display what is being done"
-                echo "	-s, --shell		Do nothing and display commands that would be executed"
-		echo
-		echo "Note: if the --subst-char option is given without parameters, spaces will be"
-		echo "      replaced with nothing (concatenation)."
-		echo
-		return 0
-                ;;
+        "-h" | "--help")
+            echo "rmspc: remove spaces from all filenames in current directories"
+            echo
+            echo "Usage: rmspc [option]"
+            echo
+            echo "Options:"
+            echo "	-h, --help		Display that help screen"
+            echo "	-r, --recursive		Treat subdirectories of the given directory"
+            echo "	-c, --subst-char	Change the replacement character (default is underscore)"
+            echo "	-v, --verbose		Display more details (recursive mode only)"
+            echo "	-s, --shell		Do nothing and display commands that would be executed"
+            echo
+            echo "Note: if the --subst-char option is given without parameters, spaces will be"
+            echo "      replaced with nothing (concatenation)."
+            echo
+            return 0
+            ;;
 
-            "-r"|"--recursive")
-                local recurs=1
-                ;;
+        "-r" | "--recursive")
+            local recurs=1
+            ;;
 
-            "-c"?*|"--subst-char"?*)
-		if [[ $(echo $opt | grep "=") ]]; then
-                    local substchar=$(echo "$opt" | cut -f 2- -d '=')
-		else
-		    local substchar='none'
-		fi
-		;;
+        "-c"?* | "--subst-char"?*)
+            if [[ $(echo $opt | grep "=") ]]; then
+                local substchar=$(echo "$opt" | cut -f 2- -d '=')
+            else
+                local substchar='none'
+            fi
+            ;;
 
-	    "-v"|"--verbose")
-		local verb=1
-                ;;
+        "-v" | "--verbose")
+            local verb=1
+            ;;
 
-            "-s"|"--shell")
-                local shell=1
-                ;;
+        "-s" | "--shell")
+            local shell=1
+            ;;
 
-            *)
-                disp E "Invalid parameter, use \"rmspc --help\" to display options list"
-                echo
-                return 1
-                ;;
+        *)
+            disp E "Invalid parameter, use \"rmspc --help\" to display options list"
+            echo
+            return 1
+            ;;
         esac
     done
 
@@ -156,12 +189,12 @@ rmspc ()
     for f in *; do
         [[ $recurs ]] && [[ -d "$f" ]] && (
             [[ $verb ]] && disp I "Entering directory $(pwd)/$f ..."
-	    local lastdir=$f
-            pushd "$f" > /dev/null
+            local lastdir=$f
+            pushd "$f" >/dev/null
             rmspc $@
-            popd > /dev/null
+            popd >/dev/null
             [[ $verb ]] && disp I "Leaving directory $(pwd)/$lastdir"
-	    unset lastdir
+            unset lastdir
         )
 
         if [[ $(echo $f | grep " ") ]]; then
@@ -177,3 +210,6 @@ rmspc ()
     unset lst substchar verb shell newf command mvopt
 }
 export -f rmspc
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/fun.sh

@@ -0,0 +1,52 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
+# ------------------------------------------------------------------------------
+# Make non-IT peoples think you're busy doing something hard
+# ------------------------------------------------------------------------------
+busy()
+{
+    if [[ -n $1 ]]; then
+        local pattern="$@"
+    else
+        local pattern="ca fe"
+    fi
+    cat /dev/urandom | hexdump -C | grep "$pattern"
+    unset pattern
+}
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/help.sh

@@ -1,3 +1,39 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Display list of commands and general informations
 # ------------------------------------------------------------------------------
@@ -31,3 +67,5 @@ EOF
 }
 export -f help
 
+# ------------------------------------------------------------------------------
+# EOF

profile.d/info.sh

@@ -1,17 +1,52 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Show profile version
 # ------------------------------------------------------------------------------
-ver ()
+ver()
 {
     disp "Profile version $PROFVERSION."
 }
 export -f ver
 
-
 # ------------------------------------------------------------------------------
 # Display weather of the given city (or default one)
 # ------------------------------------------------------------------------------
-meteo ()
+meteo()
 {
     cities=$@
     [[ $# -eq 0 ]] && local cities=$DEFAULT_CITY
@@ -22,7 +57,6 @@ meteo ()
 }
 export -f meteo
 
-
 # ------------------------------------------------------------------------------
 # Display system general information
 # ------------------------------------------------------------------------------
@@ -30,26 +64,29 @@ showinfo()
 {
     echo -e "\n"
     if command -v figlet >/dev/null 2>&1; then
-	if [[ -s /usr/share/figlet/ansi_shadow.flf ]]; then
-	    local figopt="-f ansi_shadow"
-	fi
-	figlet -k $(hostname) $figopt
+        if [[ -s /usr/share/figlet/ansi_shadow.flf ]]; then
+            local figopt="-f ansi_shadow"
+        fi
+        figlet -k $(hostname) $figopt
     else
-	echo "$(hostname -f)"
+        echo "$(hostname -f)"
     fi
     echo ""
     if command -v neofetch >/dev/null 2>&1; then
-	neofetch
+        neofetch
     else
-	(
-	    if [[ -s /etc/os-release ]]; then
-		. /etc/os-release
-		echo "$NAME $VERSION"
-	    else
-		cat /proc/version
-	    fi
-	    echo "Uptime: $(uptime)"
-	)
+        (
+            if [[ -s /etc/os-release ]]; then
+                . /etc/os-release
+                echo "$NAME $VERSION"
+            else
+                cat /proc/version
+            fi
+            echo "Uptime: $(uptime)"
+        )
     fi
 }
 export -f showinfo
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/lang.sh

@@ -1,7 +1,43 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Change locale to French
 # ------------------------------------------------------------------------------
-setfr ()
+setfr()
 {
     # Set fr locale definitions
     export LANG=fr_FR.UTF-8
@@ -13,7 +49,7 @@ export -f setfr
 # ------------------------------------------------------------------------------
 # Change locale to C standard
 # ------------------------------------------------------------------------------
-setc ()
+setc()
 {
     # Locale definitions
     export LANG=C
@@ -25,7 +61,7 @@ export -f setc
 # ------------------------------------------------------------------------------
 # Change locale to US (needed by Steam)
 # ------------------------------------------------------------------------------
-setus ()
+setus()
 {
     # Locale definitions
     export LANG=en_US.UTF-8
@@ -33,3 +69,6 @@ setus ()
     export LC_ALL=en_US.UTF-8
 }
 export -f setus
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/net.sh

@@ -1,49 +1,87 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Determine if parameter is a valid IPv4 address
 # ------------------------------------------------------------------------------
-isipv4 ()
+isipv4()
 {
     # Set up local variables
-    local  ip=$1
+    local ip=$1
 
     # Start with a regex format test
     if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
-	local old_ifs=$IFS
-	IFS="."
-	ip=($ip)
-	IFS=$old_ifs
-	if [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
-		  && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]; then
-	    if [[ -t 1 ]]; then
-		disp "The given IPv4 is valid."
-	    fi
-	    return 0
-	fi
+        local old_ifs=$IFS
+        IFS="."
+        ip=($ip)
+        IFS=$old_ifs
+        if [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 &&
+            ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]; then
+            if [[ -t 1 ]]; then
+                disp "The given IPv4 is valid."
+            fi
+            return 0
+        fi
     fi
     if [[ -t 1 ]]; then
-	disp "The given parameter is NOT a valid IPv4."
+        disp "The given parameter is NOT a valid IPv4."
     fi
     return 1
 }
 export -f isipv4
 
-
 # ------------------------------------------------------------------------------
 # Determine if parameter is a valid IPv4 address
 # ------------------------------------------------------------------------------
-isipv6 ()
+isipv6()
 {
     local ip="$1"
     local regex='^([0-9a-fA-F]{0,4}:){1,7}[0-9a-fA-F]{0,4}$'
     if [[ $ip =~ $regex ]]; then
-	if [[ -t 1 ]]; then
-	    disp "The given IPv6 is valid."
-	fi
-	return 0
+        if [[ -t 1 ]]; then
+            disp "The given IPv6 is valid."
+        fi
+        return 0
     fi
     if [[ -t 1 ]]; then
-	disp "The given parameter is not a valid IPv6."
+        disp "The given parameter is not a valid IPv6."
     fi
     return 1
 }
 export -f isipv6
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/packages.sh

@@ -1,42 +1,83 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Look for a package within installed one
 # ------------------------------------------------------------------------------
-dpkgs ()
+pkgs()
 {
     local count=0
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-h"|"--help")
-                echo "dpkgs: look for an installed package by it's name."
-                echo
-                echo "Usage: dpkgs <string>"
-                return 0
-                ;;
+        "-h" | "--help")
+            echo "dpkgs: look for an installed package by it's name."
+            echo
+            echo "Usage: dpkgs <string>"
+            return 0
+            ;;
 
-            "-"*)
-                echo "Invalid option, use \"dpkgs --help\" to display usage."
-                echo
+        "-"*)
+            disp E "Invalid option, use \"dpkgs --help\" to display usage."
+            echo
+            return 1
+            ;;
+
+        *)
+            local pkg=$1 && shift
+            count=$(($count + 1))
+            [[ $count -gt 1 ]] &&
+                disp E "Please specify a package name, without space, eventually partial." &&
                 return 1
-                ;;
 
-            *)
-                local pkg=$1 && shift
-                count=$(( $count + 1 ))
-                [[ $count -gt 1 ]] &&
-                    disp E "Please specify a package name, without space, eventually partial." &&
-                    return 1
-
-                ;;
+            ;;
         esac
     done
     [[ $count -lt 1 ]] &&
         disp E "Please specify a package name, without space, eventually partial." &&
         return 1
 
-    [[ -x /usr/sbin/dpkg ]] &&
-        disp E "dpkg command seems unavialable." &&
+    command -v dpkg >/dev/null 2>&1 && local cmd="dpkg -l"
+    command -v rpm >/dev/null 2>&1 && local cmd="rpm -qa"
+    if [[ -z $cmd ]]; then
+        disp E "No usable package manager seems unavialable."
         return 2
-
-    dpkg -l | grep $pkg
+    fi
+    $cmd | grep $pkg
 }
-export -f dpkgs
+export -f pkgs
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/processes.sh

@@ -1,17 +1,52 @@
+#!/bin/bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Search processes matching the given string
 # ------------------------------------------------------------------------------
-ppg ()
+ppg()
 {
-    ps -edf | grep $@ | grep -v "grep $@"
+    ps -edf | grep "$@" | grep -v "grep $@"
 }
 export -f ppg
 
-
 # ------------------------------------------------------------------------------
 # Get PID list of the given process name
 # ------------------------------------------------------------------------------
-gpid ()
+gpid()
 {
     [[ $UID -eq 0 ]] && local psopt="-A"
     [[ $# -eq 1 ]] && local single=1
@@ -27,14 +62,33 @@ gpid ()
 }
 export -f gpid
 
-
 # ------------------------------------------------------------------------------
 # Kill all processes owned by the given users
 # ------------------------------------------------------------------------------
-ku ()
+ku()
 {
     for u in $@; do
-        killall -u $u
+        killall -u "$u"
     done
 }
 export -f ku
+
+# ------------------------------------------------------------------------------
+# Kill all children of a process then the process
+# ------------------------------------------------------------------------------
+kt()
+{
+    [[ -z $1 ]] && echo -e "Usage:\n\tkt <pid> [kill_options]"
+
+    local parent_pid="$1" children_pids
+    shift
+    children_pids=$(pgrep -P "$parent_pid")
+
+    for pid in $children_pids; do
+        kill_tree "$pid" "$@"
+    done
+    kill "$@" "$parent_pid"
+}
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/prompt.sh

@@ -1,3 +1,38 @@
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # timer_* functions : internal timing function for prompt
 # ------------------------------------------------------------------------------
@@ -41,7 +76,7 @@ function timer_stop
 # ------------------------------------------------------------------------------
 # Function triguered internaly by bash : defining prompt
 # ------------------------------------------------------------------------------
-set_prompt ()
+set_prompt()
 {
     Last_Command=$? # Must come first!
     Blue='\[\e[0;34m\]'
@@ -88,3 +123,6 @@ set_prompt ()
     # the text color to the default.
     PS1+="$ICyan\\w \\\$$Default "
 }
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/pwd.sh

@@ -1,3 +1,39 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # genpwd : generate a password with different criteria
 # default 16 car with up and low car, symbol and number
@@ -11,141 +47,143 @@ genpwd()
     local nbpwd=1
 
     for opt in $@; do
-	case $opt in
-	    "-h"|"--help")
-		echo "genpwd: generate a secure random password."
-		echo
-		echo "Usage: genpwd [options] [--extracars=<cars>] [--length=<n>] [nb_passwd]"
-		echo
-		echo "Options:"
-		echo "	-h, --help	Display that help screen"
-		echo "	-s, --nosymbols	Exclude symbols"
-		echo "	-n, --nonumbers	Exclude numbers"
-		echo "	-u, --noup	Exclude uppercase letters"
-		echo "	-l, --nolow	Exclude lowercase letters"
-		echo "	-e=<c>, --extracars=<c>"
-		echo "			Add the given caracters to the possible caracter list"
-		echo "	-L=<n>, --length=<n>"
-		echo "			Set length of the password (default is $length)"
-		echo "	-o=<n>, --occurences=<n>"
-		echo "			Set the maximum occurences of a same caracter (default is $occurs)"
-		echo
-		echo "If the --extracars parameter is given, at least one of the given caracter will"
-		echo "be used in the final password."
-		echo
-		echo "Please note that some caracters might be interpreted by Bash or Awk programs,"
-		echo "and thus, cannot be used without provoquing errors. Those identified caracters"
-		echo "are :"
-		echo '	* ? \ $ { }'
-		echo
-		return 0
-		;;
-	    "-s"|"--nosymbols")
-		symb=0
-		;;
-	    "-n"|"--nonumbers")
-		numb=0
-		;;
-	    "-u"|"--noup")
-		maj=0
-		;;
-	    "-l"|"--nolow")
-		min=0
-		;;
-	    "-e"?*|"--extracars"?*)
-		local extcar=$(echo "$opt" | cut -f 2- -d '=')
-		;;
-	    "-L"?*|"--length"?*)
-		local length=$(echo "$opt" | cut -f 2- -d '=')
-		if ! [[ $length =~ ^[0-9]+$ ]]; then
-		    disp E "The --length parameter requires a number."
-		    return 1
-		fi
-		;;
-	    "-o"?*|"--occurences"?*)
-		local occurs=$(echo "$opt" | cut -f 2- -d '=')
-		if ! [[ $occurs =~ ^[1-9]+$ ]]; then
-		    disp E "The --occurs parameter requires a number from 1 to 9."
-		    return 1
-		fi
-		;;
-	    "-*")
-		disp E "Unknow parameter ${opt}."
-		return 1
-		;;
-	    *)
-		if ! [[ $opt =~ ^[1-9]+$ ]]; then
-		    disp E "Unknow parameter ${opt}."
-		    return 1
-		else
-		    local nbpwd=$opt
-		fi
-		;;
-	esac
+        case $opt in
+        "-h" | "--help")
+            echo "genpwd: generate one or more secure random password."
+            echo
+            echo "Usage: genpwd [options] [--extracars=<cars>] [--length=<n>] [nb_passwd]"
+            echo
+            echo "Options:"
+            echo "	-h, --help	Display that help screen"
+            echo "	-s, --nosymbols	Exclude symbols"
+            echo "	-n, --nonumbers	Exclude numbers"
+            echo "	-u, --noup	Exclude uppercase letters"
+            echo "	-l, --nolow	Exclude lowercase letters"
+            echo "	-e=<c>, --extracars=<c>"
+            echo "			Add the given caracters to the possible caracter list"
+            echo "	-L=<n>, --length=<n>"
+            echo "			Set length of the password (default is $length)"
+            echo "	-o=<n>, --occurences=<n>"
+            echo "			Set the maximum occurences of a same caracter (default is $occurs)"
+            echo
+            echo "If the --extracars parameter is given, at least one of the given caracter will"
+            echo "be used in the final password."
+            echo
+            echo "Please note that some caracters might be interpreted by Bash or Awk programs,"
+            echo "and thus, cannot be used without provoquing errors. Those identified caracters"
+            echo "are :"
+            echo '	* ? \ $ { }'
+            echo
+            return 0
+            ;;
+        "-s" | "--nosymbols")
+            symb=0
+            ;;
+        "-n" | "--nonumbers")
+            numb=0
+            ;;
+        "-u" | "--noup")
+            maj=0
+            ;;
+        "-l" | "--nolow")
+            min=0
+            ;;
+        "-e"?* | "--extracars"?*)
+            local extcar=$(echo "$opt" | cut -f 2- -d '=')
+            ;;
+        "-L"?* | "--length"?*)
+            local length=$(echo "$opt" | cut -f 2- -d '=')
+            if ! [[ $length =~ ^[0-9]+$ ]]; then
+                disp E "The --length parameter requires a number."
+                return 1
+            fi
+            ;;
+        "-o"?* | "--occurences"?*)
+            local occurs=$(echo "$opt" | cut -f 2- -d '=')
+            if ! [[ $occurs =~ ^[1-9]+$ ]]; then
+                disp E "The --occurs parameter requires a number from 1 to 9."
+                return 1
+            fi
+            ;;
+        "-*")
+            disp E "Unknow parameter ${opt}."
+            return 1
+            ;;
+        *)
+            if ! [[ $opt =~ ^[1-9]+$ ]]; then
+                disp E "Unknow parameter ${opt}."
+                return 1
+            else
+                local nbpwd=$opt
+            fi
+            ;;
+        esac
     done
 
     # Function selecting a random caracter from the list in parameter
-    pickcar()
-    {
-	# When a character is picked we check if it's not appearing already twice
-	# elsewhere, we choose an other char, to compensate weak bash randomizer
-	while [[ -z $char ]]; do
-	    local char=$(echo ${1:RANDOM%${#1}:1} $RANDOM)
-	    if [[ $(awk -F"$char" '{print NF-1}' <<< "$picked") -gt $occurs ]]; then
-		unset char
-	    fi
-	done
-	picked+="$char"
-	echo "$char"
+    pickcar() {
+        # When a character is picked we check if it's not appearing already twice
+        # elsewhere, we choose an other char, to compensate weak bash randomizer
+        while [[ -z $char ]]; do
+            local char="${1:RANDOM%${#1}:1} $RANDOM"
+            if [[ $(awk -F"$char" '{print NF-1}' <<<"$picked") -gt $occurs ]]; then
+                unset char
+            fi
+        done
+        picked+="$char"
+        echo "$char"
     }
 
     disp I "Generating $nbpwd passwords, please wait..."
-    for n in $( seq 1 $nbpwd ); do
-	{
-	    local carset='' # store final caracter set to use
-	    local picked='' # store already used caracter
-	    local rlength=0 # store already assigned length of caracters
+    for n in $(seq 1 $nbpwd); do
+        {
+            local carset='' # store final caracter set to use
+            local picked='' # store already used caracter
+            local rlength=0 # store already assigned length of caracters
 
-	    # ?, *, $ and \ impossible to use to my knowledge as it would be interpreted
-	    if [[ $symb == 1 ]]; then
-		pickcar '!.@#&%/^-_'
-		carset+='!.@#&%/^-_'
-		(( rlength++ ))
-	    fi
-	    if [[ $numb == 1 ]]; then
-		pickcar '0123456789'
-		carset+='0123456789'
-		(( rlength++ ))
-	    fi
-	    if [[ $maj == 1 ]]; then
-		pickcar 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-		carset+='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-		(( rlength++ ))
-	    fi
-	    if [[ $min == 1 ]]; then
-		pickcar 'abcdefghijklmnopqrstuvwxyz'
-		carset+='abcdefghijklmnopqrstuvwxyz'
-		(( rlength++ ))
-	    fi
-	    if [[ -n $extcar ]]; then
-		pickcar "$extcar"
-		carset+=$extcar
-		(( rlength++ ))
-	    fi
+            # ?, *, $ and \ impossible to use to my knowledge as it would be interpreted
+            if [[ $symb == 1 ]]; then
+                pickcar '!.@#&%/^-_'
+                carset+='!.@#&%/^-_'
+                ((rlength++))
+            fi
+            if [[ $numb == 1 ]]; then
+                pickcar '0123456789'
+                carset+='0123456789'
+                ((rlength++))
+            fi
+            if [[ $maj == 1 ]]; then
+                pickcar 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+                carset+='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+                ((rlength++))
+            fi
+            if [[ $min == 1 ]]; then
+                pickcar 'abcdefghijklmnopqrstuvwxyz'
+                carset+='abcdefghijklmnopqrstuvwxyz'
+                ((rlength++))
+            fi
+            if [[ -n $extcar ]]; then
+                pickcar "$extcar"
+                carset+=$extcar
+                ((rlength++))
+            fi
 
-	    # Check if we have enough car to have something viable
-	    if [[ ${#carset} -lt $length ]]; then
-		disp E 'Not enought caracters are authorised for the password length.'
-		disp E 'Please allow more caracter (preferably) or reduce password lentgh.'
-		return 1
-	    fi
+            # Check if we have enough car to have something viable
+            if [[ ${#carset} -lt $length ]]; then
+                disp E 'Not enought caracters are authorised for the password length.'
+                disp E 'Please allow more caracter (preferably) or reduce password lentgh.'
+                return 1
+            fi
 
-	    for i in $( seq 1 $(( $length - $rlength )) ); do
-		pickcar "$carset"
-	    done
-	} | sort -R | awk '{printf "%s", $1}'
-	unset picked carset rlength
-	echo
+            for i in $(seq 1 $(($length - $rlength))); do
+                pickcar "$carset"
+            done
+        } | sort -R | awk '{printf "%s", $1}'
+        unset picked carset rlength
+        echo
     done
 }
 export -f genpwd
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/rain.sh

@@ -1,3 +1,39 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Let the rain fall
 # ------------------------------------------------------------------------------
@@ -8,7 +44,7 @@ rain()
     local rain_colors=("\e[37m" "\e[37;1m")
     # More from 256 color mode
     for i in {244..255}; do
-        rain_colors=( "${rain_colors[@]}" "\e[38;5;${i}m" )
+        rain_colors=("${rain_colors[@]}" "\e[38;5;${i}m")
     done
     local rain_tab=${#rain_cars[@]}
     local rain_color_tab=${#rain_colors[@]}
@@ -19,18 +55,17 @@ rain()
     local X=0 Y=0 drop_length=0 rain_drop=0
     local max_rain_width=0 new_rain_odd=0 falling_odd=0
 
-
     sigwinch() {
         term_width=$(tput cols)
         term_height=$(tput lines)
         #step_duration=0.025
-        (( max_rain_width = term_width * term_height / 4 ))
-        (( max_rain_height = term_height < 10 ? 1 : term_height / 10 ))
+        ((max_rain_width = term_width * term_height / 4))
+        ((max_rain_height = term_height < 10 ? 1 : term_height / 10))
         # In percentage
-        (( new_rain_odd = term_height > 50 ? 100 : term_height * 2 ))
-        (( new_rain_odd = new_rain_odd * 75 / 100 ))
-        (( falling_odd = term_height > 25 ? 100 : term_height * 4 ))
-        (( falling_odd = falling_odd * 90 / 100 ))
+        ((new_rain_odd = term_height > 50 ? 100 : term_height * 2))
+        ((new_rain_odd = new_rain_odd * 75 / 100))
+        ((falling_odd = term_height > 25 ? 100 : term_height * 4))
+        ((falling_odd = falling_odd * 90 / 100))
     }
 
     do_exit() {
@@ -45,19 +80,19 @@ rain()
             Y=${rains[idx + 1]}
             drop_length=${rains[idx + 4]}
             for ((y = Y; y < Y + drop_length; y++)); do
-                (( y < 1 || y > term_height )) && continue
+                ((y < 1 || y > term_height)) && continue
                 echo -ne "\e[${y};${X}H "
             done
         done
 
         for ((idx = 0; idx < num_rains * num_rain_metadata; idx += num_rain_metadata)); do
-            if (( 100 * RANDOM / 32768 < falling_odd )); then
+            if ((100 * RANDOM / 32768 < falling_odd)); then
                 # Falling
-                if (( ++rains[idx + 1] > term_height )); then
+                if ((++rains[idx + 1] > term_height)); then
                     # Out of screen, bye sweet <3
                     rains=("${rains[@]:0:idx}"
                         "${rains[@]:idx+num_rain_metadata:num_rains*num_rain_metadata}")
-                    (( num_rains-- ))
+                    ((num_rains--))
                     continue
                 fi
             fi
@@ -67,7 +102,7 @@ rain()
             drop_color=${rains[idx + 3]}
             drop_length=${rains[idx + 4]}
             for ((y = Y; y < Y + drop_length; y++)); do
-                (( y < 1 || y > term_height )) && continue
+                ((y < 1 || y > term_height)) && continue
                 echo -ne "\e[${y};${X}H${drop_color}${rain_drop}"
             done
         done
@@ -83,24 +118,24 @@ rain()
     local rains=()
     local num_rains=0
     sigwinch
-    while (( exit_st <= 0 )); do
-        if (( $exit_st <=0 )); then
+    while ((exit_st <= 0)); do
+        if (($exit_st <= 0)); then
             read -n 1 -t $step_duration ch
             case "$ch" in
-                q|Q)
-                    do_exit
+            q | Q)
+                do_exit
                 ;;
             esac
 
-            if (( num_rains < max_rain_width )) && (( 100 * RANDOM / 32768 < new_rain_odd )); then
+            if ((num_rains < max_rain_width)) && ((100 * RANDOM / 32768 < new_rain_odd)); then
                 # Need new |, 1-based
                 rain_drop="${rain_cars[rain_tab * RANDOM / 32768]}"
                 drop_color="${rain_colors[rain_color_tab * RANDOM / 32768]}"
-                drop_length=$(( max_rain_height * RANDOM / 32768 + 1 ))
-                X=$(( term_width * RANDOM / 32768 + 1 ))
-                Y=$(( 1 - drop_length ))
-                rains=( "${rains[@]}" "$X" "$Y" "$rain_drop" "$drop_color" "$drop_length" )
-                (( num_rains++ ))
+                drop_length=$((max_rain_height * RANDOM / 32768 + 1))
+                X=$((term_width * RANDOM / 32768 + 1))
+                Y=$((1 - drop_length))
+                rains=("${rains[@]}" "$X" "$Y" "$rain_drop" "$drop_color" "$drop_length")
+                ((num_rains++))
             fi
 
             # Let rain fall!
@@ -117,3 +152,6 @@ rain()
     trap - WINCH
 }
 export -f rain
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/ssh.sh

@@ -1,7 +1,43 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
 # ------------------------------------------------------------------------------
 # Remove host from know_host (name and IP) for the active user
 # ------------------------------------------------------------------------------
-rmhost ()
+rmhost()
 {
     if [[ "$#" -lt 1 ]]; then
         disp E "Incorrect number of parameters."
@@ -10,52 +46,51 @@ rmhost ()
     fi
 
     while [[ $1 ]]; do
-	local hst=$1 && shift
-	isipv4 $hst > /dev/null
-	local v4=$?
-	isipv6 $hst > /dev/null
-	local v6=$?
+        local hst=$1 && shift
+        isipv4 $hst >/dev/null
+        local v4=$?
+        isipv6 $hst >/dev/null
+        local v6=$?
 
-	if [[ $v4 -eq 0 || $v6 -eq 0 ]]; then
-	    local ip=$hst
-	    unset hst
-	fi
-	unset v4 v6
+        if [[ $v4 -eq 0 || $v6 -eq 0 ]]; then
+            local ip=$hst
+            unset hst
+        fi
+        unset v4 v6
 
-	if [[ ! $ip && $hst ]]; then
-	    ip=$(host $hst | grep "has address" | awk '{print $NF}')
-	    [[ ! $? ]] &&
-		disp E "Impossible to extract IP from hostname." &&
-		return 1
-	fi
+        if [[ ! $ip && $hst ]]; then
+            ip=$(host $hst | grep "has address" | awk '{print $NF}')
+            [[ ! $? ]] &&
+                disp E "Impossible to extract IP from hostname." &&
+                return 1
+        fi
 
-	if [[ $hst ]]; then
-	    disp I "Removing host $hst from ssh known_host..."
-	    ssh-keygen -R $hst > /dev/null
-	fi
-	if [[ $ip ]]; then
-	    disp I "Removing IP $ip from ssh known_host..."
-	    ssh-keygen -R $ip > /dev/null
-	fi
-	unset hst ip
+        if [[ $hst ]]; then
+            disp I "Removing host $hst from ssh known_host..."
+            ssh-keygen -R $hst >/dev/null
+        fi
+        if [[ $ip ]]; then
+            disp I "Removing IP $ip from ssh known_host..."
+            ssh-keygen -R $ip >/dev/null
+        fi
+        unset hst ip
     done
 }
 export -f rmhost
 
-
 # ------------------------------------------------------------------------------
 # Login root via SSH on the given machine
 # ------------------------------------------------------------------------------
-ssr ()
+ssr()
 {
-    for opt in $@ ; do
+    for opt in $@; do
         case $opt in
-            "-h"|"--help")
-                echo "ssr: do a root user ssh login."
-                echo
-                echo "Usage: ssr <server [ssh options]>"
-                return 0
-                ;;
+        "-h" | "--help")
+            echo "ssr: do a root user ssh login."
+            echo
+            echo "Usage: ssr <server [ssh options]>"
+            return 0
+            ;;
         esac
     done
 
@@ -68,3 +103,6 @@ ssr ()
     ssh -Y root@$srv $@
 }
 export -f ssr
+
+# ------------------------------------------------------------------------------
+# EOF

profile.d/updates.sh

@@ -0,0 +1,102 @@
+#!/usr/bin/env bash
+# ------------------------------------------------------------------------------
+# Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
+# Protected by the BSD3 license. Please read bellow for details.
+#
+# * Redistribution and use in source and binary forms,
+# * with or without modification, are permitted provided
+# * that the following conditions are met:
+# *
+# *   Redistributions of source code must retain the above
+# *   copyright notice, this list of conditions and the
+# *   following disclaimer.
+# *
+# *   Redistributions in binary form must reproduce the above
+# *   copyright notice, this list of conditions and the following
+# *   disclaimer in the documentation and/or other materials
+# *   provided with the distribution.
+# *
+# *   Neither the name of the copyright holder nor the names
+# *   of any other contributors may be used to endorse or
+# *   promote products derived from this software without
+# *   specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+# * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+# * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# * OF SUCH DAMAGE.
+# ------------------------------------------------------------------------------
+
+export UPDT_URL="https://git.geoffray-levasseur.org/fatalerrors/profile/raw/branch/master"
+
+# ------------------------------------------------------------------------------
+# Check for profile updates
+# ------------------------------------------------------------------------------
+check_updates()
+{
+    if [[ $1 == "-q" ]]; then
+        # Quiet mode is mostly used internally when profile_upgrade is called
+        quiet=1
+    fi
+    disp I "Checking for updates..."
+    local vfile="/tmp/version"
+    wget "$UPDT_URL/version" -O $vfile >/dev/null 2>&1 || {
+        disp E "Can't download version file, impossible to proceed!"
+        return 5
+    }
+
+    if [[ -s /tmp/version ]]; then
+        local lastver=$(cat /tmp/version)
+        if [[ $lastver != $PROFVERSION ]]; then
+            disp I "You have version $PROFVERSION installed. Version $lastver is available."
+            [[ $quiet ]] && disp I "You should upgrade to last version when possible."
+            result=0
+        else
+            disp I "Your version is up-to-date."
+            result=1
+        fi
+        rm -f $vfile
+    else
+        disp E "Impossible to read temporary file, impossible to proceed."
+    fi
+    unset lastver vfile
+    return $result
+}
+
+# ------------------------------------------------------------------------------
+# Apply update to profile
+# ------------------------------------------------------------------------------
+profile_upgrade()
+{
+    if [[ $(check_updates -q) -eq 0 ]]; then
+        if [[ -s $MYPATH/profile.sh ]]; then
+            disp E "Installation path detection failed, cannot upgrade automatically."
+            return 1
+        fi
+        if [[ -d $MYPATH/.git ]]; then
+            disp I "Git installation detected, applying git pull."
+            local curdir=$(pwd)
+            cd $MYPATH
+            git pull
+            if [[ $? -ne 0 ]]; then
+                disp E "Git pull failed, upgrade not applyed."
+            else
+                disp I "Successfully upgraded using git."
+                disp I "You should now logout and login again to enjoy new profile."
+                cd $curdir
+            fi
+        else
+            disp I "Applying traditionnal upgrade..."
+            # TODO
+        fi
+    fi
+}
+
+# EOF

profile.sh

@@ -1,43 +1,6 @@
 #!/bin/bash
 # Begin profile
 # ------------------------------------------------------------------------------
-# Initial version from Beyond Linux From Scratch by
-#	* James Robertson <jameswrobertson@earthlink.net>
-#	* Dagmar d'Surreal <rivyqntzne@pbzpnfg.arg>
-# ------------------------------------------------------------------------------
-# Current version from Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
-# 16/02/2013 v1.0.0 : Initial version
-# 24/10/2015 v2.0.0 : Added advanced functionnalities (clean, srr, etc.)
-# 04/02/2017 v2.0.1 : clean improvements (--shell)
-# 16/09/2018 v2.1.0 : Added rmhost, setc, setfr, more locales management
-# 23/09/2019 v2.1.1 : [bugfix] dpkgs
-# 24/09/2019 v2.1.2 : [bugfix] bug in profile version display
-# 16/12/2019 v2.2.0 : Added showinfo, primary write of showdiskmap
-# 08/01/2020 v2.3.0 : Added use of figlet and neofetch as a motd replace
-# 16/01/2020 v2.3.1 : [bugfix] non-interactive were blocked with some functions
-# 31/01/2020 v2.3.2 : Figlet: changed default font to ansi_shadow
-# 02/03/2020 v2.4.0 : Added command auzip
-# 03/03/2020 v2.5.0 : Added command taz and rmspc, auzip => utaz improved
-# 05/03/2020 v2.5.1 : Language consistancy fix, added pigz support in taz
-# 06/03/2020 v2.5.2 : Few aliases sorted out
-# 11/09/2020 v2.5.3 : Few more aliases, improved code consistancy and typo,
-#                   : improved utaz, removed showdiskmap, removed remaining French,
-#                   : added license information for future publication
-# 24/10/2020 v2.6.0 : Added session save and restore for Konsole
-# 25/12/2020 v2.6.1 : Add check on rmhost, improvements rmspc, created expendlist
-# 26/02/2021 v2.6.2 : [bugfix] taz: corrected bug with trailing slash on directories
-# 18/10/2021 v2.6.3 : changed PS1 for status bar style version, few minor improvements
-# 21/06/2022 v2.7.0 : added isipv4 and isipv6, use it in rmhost as an improvement
-# 22/06/2022 v2.7.1 : [bugfix] few minor corrections, added help command
-# 24/06/2022 v2.8.0 : Added backtrace, error and settrace, corrected showinfo
-# 19/07/2022 v2.8.1 : few cleanup, fixes and optimizations
-# 29/07/2022 v2.8.2 : added warning for non bash users
-# 27/08/2022 v3.0.0 : splitted everything, added rain screensaver
-# 07/11/2022 v3.0.1 : added concatenation to rmspc, added ku, error managed in meteo
-# 08/11/2022 v3.1.0 : added password generator
-# 10/11/2022 v3.1.1 : genpwd: test if password is doable
-# 18/11/2022 v3.2.0 : created disp command for display, make use of it
-# ------------------------------------------------------------------------------
 # Copyright (c) 2013-2022 Geoffray Levasseur <fatalerrors@geoffray-levasseur.org>
 # Protected by the BSD3 license. Please read bellow for details.
 #
@@ -72,11 +35,7 @@
 # * OF SUCH DAMAGE.
 # ------------------------------------------------------------------------------
 
-export PROFVERSION="3.2.0"
-
-export DEFAULT_CITY="Toulouse"
-
-if [[ ! $(echo $SHELL | grep bash) ]]; then
+if [[ ! $SHELL =~ bash|zsh ]]; then
     echo "That environmet script is designed to be used with bash or zsh being the shell."
     echo "Please consider using bash or zsh instead, or patch me ;)!"
     return 1
@@ -85,49 +44,71 @@ fi
 # ------------------------------------------------------------------------------
 # path* : private functions for PATH variable management
 # ------------------------------------------------------------------------------
-pathremove ()
+pathremove()
 {
     local ifs=':'
     local newpath
     local dir
     local pathvar=${2:-PATH}
-    for dir in ${!pathvar} ; do
-        if [ "$dir" != "$1" ] ; then
+    for dir in ${!pathvar}; do
+        if [ "$dir" != "$1" ]; then
             newpath=${newpath:+$newpath:}$dir
         fi
     done
     export $pathvar="$newpath"
 }
 
-pathprepend ()
+pathprepend()
 {
     pathremove $1 $2
     local pathvar=${2:-PATH}
     export $pathvar="$1${!pathvar:+:${!pathvar}}"
 }
 
-pathappend ()
+pathappend()
 {
     pathremove $1 $2
     local pathvar=${2:-PATH}
     export $pathvar="${!pathvar:+${!pathvar}:}$1"
 }
 
-
 # ------------------------------------------------------------------------------
 # ------------------------------------------------------------------------------
 # ********************************** MAIN PROGRAM ******************************
 # ------------------------------------------------------------------------------
 # ------------------------------------------------------------------------------
 
+# Store script's path (realpath -s resolve symlinks if profile.sh is a symlink)
+if [[ -z $PROFILE_PATH ]]; then
+    export MYPATH=$(dirname $(realpath -s $0))
+else
+    export MYPATH=$PROFILE_PATH
+fi
+if [[ ! -e $MYPATH/profile.sh ]]; then
+    echo "[ Warning ] Path detection failed, trying to use pwd..."
+    MYPATH=$(pwd)
+    if [[ ! -e $MYPATH/profile.sh ]]; then
+        echo "[ Error ] Impossible to determine installation path, pretty much nothing will work."
+    fi
+fi
+
+if [[ ! -s $MYPATH/version ]]; then
+    echo "[ Warning ] Impossible to determine running version of profile, your installation might be broken."
+fi
+export PROFVERSION=$(cat $MYPATH/version)
+
 # Build PATH environment variable
-if [[ $EUID -eq 0 ]] ; then
+if [[ $EUID -eq 0 ]]; then
     pathappend /sbin:/usr/sbin
 fi
 [[ -d /share/services/gestparc ]] && pathappend /share/services/gestparc
 [[ -d ~/bin ]] && pathappend ~/bin
 [[ -d ~/.local/bin ]] && pathappend ~/.local/bin
 
+# ------------------------------------------------------------------------------
+# Default values are set here and will be overloaded with config file if any
+# ------------------------------------------------------------------------------
+
 # Set bash history
 export HISTSIZE=50000
 export HISTIGNORE="&:[bf]g:exit"
@@ -143,17 +124,22 @@ export CFLAGS="-O2 -pipe -march=native"
 export MAKEFLAGS='-j12'
 export PKGSOURCES='/share/src/archives'
 
+# Default city for weather forcast
+export DEFAULT_CITY="Toulouse"
 
 # ------------------------------------------------------------------------------
 # Default values could be altered after this line
 # ------------------------------------------------------------------------------
 
+# Load global configuration
+[[ -f $MYPATH/etc/profile.conf ]] && . $MYPATH/etc/profile.conf
+
 # Load personal configuration
 [[ -f ~/.profile.conf ]] && . ~/.profile.conf
 
-# Execute optionnal config script if any
-for script in ~/profile.d/*.sh ; do
-    if [ -r $script ] ; then
+# Load module scripts
+for script in $MYPATH/profile.d/*.sh; do
+    if [[ -r $script ]]; then
         . $script
     fi
 done

version

@@ -0,0 +1 @@
+3.3.2